FixVault
Home › Hummer › 2008 › H3 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.7L - DTC P0013 To DTC P0365 › DTC P0013 › Circuit/System Verification

Circuit/System Verification

  1. Ensure the vehicle has the proper oil viscosity.
  2. Observe the engine oil level. The engine oil level should be within the operating range.
  3. Allow the engine to reach operating temperature.
  4. Command each CMP actuator to 20 percent. The CMP actuator angle desired parameter should match the CMP actuator actual parameter.
  5. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
About FixVault