Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Brake Fluid Level Sensor

Courtesy of GENERAL MOTORS CORP.

Align the brake fluid level sensor to the master cylinder reservoir.
Press the brake fluid level sensor into the master cylinder reservoir, ensure the retaining tabs click into place.

Fig 2: Identifying Brake Fluid Level Sensor Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the brake fluid level sensor.

Fig 3: View Of Master Cylinder Mounting Nuts

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Ensure the gasket on the outside barrel of the master cylinder is positioned properly and is free of cuts and tears.

Install the brake master cylinder to the booster assembly. Refer to Master Cylinder Replacement .