FixVault
Home › Hummer › 2008 › H3 Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 126 (Disc Brake System) › Repair Instructions › Rear Brake Shield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Wheel Bearing/Hub Assembly Nuts
    GM1276112Courtesy of GENERAL MOTORS CORP.
  1. Install the shield to the wheel knuckle.
  2. Install the wheel bearing/hub. Refer to Rear Wheel Bearing and Hub Replacement .
About FixVault