FixVault
Home › Hummer › 2008 › H3 Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 126 (Disc Brake System) › Repair Instructions › Rear Disc Brake Backing Plate Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing/hub. Refer to Rear Wheel Bearing and Hub Replacement .
    2. IMPORTANT: The backing plate is attached to the steering knuckle through the wheel bearing hub bolts.
  2. Remove the backing plate from the steering knuckle.
About FixVault