FixVault
Home › Hummer › 2008 › H3 Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 133 (HVAC System - Automatic) › Repair Instructions › Blower Motor Control Processor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  2. Remove the blower motor control processor wire harness connector.
  3. Remove the blower motor control processor screws.
    4. Fig 1: Identifying Blower Motor Control Processor
    GM1203578Courtesy of GENERAL MOTORS CORP.
  4. Remove the blower motor control processor.
About FixVault