FixVault
Home › Hummer › 2008 › H3 Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 3 (Lighting Systems) › Repair Instructions › Dome Lamp Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Dome Lamp Lens
    GM1277251Courtesy of GENERAL MOTORS CORP.
  1. Remove the lens from the dome lamp.
    2. Fig 2: View Of Dome Lamp & Components
    GM1277252Courtesy of GENERAL MOTORS CORP.
  2. Carefully use a flat-bladed tool, and release the tabs (2) retaining to the dome lamp to the headliner.
  3. Lower the dome lamp and disconnect the electrical connector (1).
  4. Remove the dome lamp from the vehicle.
About FixVault