FixVault
Home › Hummer › 2008 › H3 Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 40 (Disc Brake System) › Repair Instructions › Brake Caliper Bracket Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Brake Dust Caution .
NOTE: Refer to Brake Caliper Notice .
    Fig 1: Identifying Brake Caliper
    GM1241368Courtesy of GENERAL MOTORS CORP.
  1. Remove the front brake caliper. Refer to Brake Caliper Replacement .
  2. Remove the brake pads from the mounting bracket.
    3. Fig 2: View Of Brake Caliper Mounting Bracket Mounting Bolts
    GM1241469Courtesy of GENERAL MOTORS CORP.
  3. Remove the mounting bolts for the brake caliper mounting bracket.
    4. Fig 3: View Of Brake Caliper Mounting Bracket
    GM1241358Courtesy of GENERAL MOTORS CORP.
  4. Remove the brake caliper mounting bracket.
About FixVault