Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Propeller Shaft CV Joint Heat Shield

Courtesy of GENERAL MOTORS CORP.

Install the front propeller shaft CV joint heat shield (2) to the vehicle.
Inspect the front propeller shaft CV joint heat shield bolts (1). Replace if damaged or worn.

CAUTION: Refer to Fastener Caution .

Install the front propeller shaft CV joint heat shield bolts (1) and tighten to 9 N.m (80 lb in).
Lower the vehicle.