FixVault
Home › Hummer › 2008 › H3 Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 469 (Fixed And MOVEABLE Windows System) › Repair Instructions › Rear Window Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stationary window into the opening. Refer to Adhesive Installation of Stationary Windows .
  2. Connect all of the rear window electrical connectors.
  3. Install the headliner. Refer to Headlining Trim Panel Replacement .
  4. Install the rear sail trim panels. Refer to Sail Panel Replacement .
  5. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement .
  6. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  7. Cycle the rear compartment lid open and close in order to position the lower reveal molding under the rear compartment lid.
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
About FixVault