FixVault
Home › Hummer › 2008 › H3 Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 50 (Cruise Control System) › Repair Instructions › Clutch Pedal Cruise Control Release Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Clutch Release Switch
    GM1302120Courtesy of GENERAL MOTORS CORP.
  1. Slide only the clutch release switch retainer (5) into the clutch pedal bracket (1), until the locking tabs are fully engaged.
  2. Adjust the clutch release switch. Refer to Clutch Pedal Cruise Control Release Switch Adjustment .
About FixVault