Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of I/P Compartment Assembly

Courtesy of GENERAL MOTORS CORP.

Position the I/P compartment assembly to the I/P.
Close and fully latch the I/P compartment door.

NOTE: Refer to Fastener Notice .

Install the fasteners retaining the I/P compartment assembly to the I/P.
Tighten: Tighten the fasteners to 3 N.m (27 lb in).
Ensure the alignment of the door allows for proper operation.