FixVault
Home › Hummer › 2008 › H3 Base, Standard › Repair and Diagnosis › Electrical › Starter › Battery, Charging System And Starting System › Repair Instructions › Generator Bracket Replacement › Removal Procedure

Removal Procedure

    Fig 1: Generator Bracket Replacement
    GM1897775Courtesy of GENERAL MOTORS CORP.
  1. Remove the generator. Refer to Generator Replacement (LH8)  or Generator Replacement (LLR) .
  2. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  3. Remove the engine wiring harness bracket bolt (4).
  4. Reposition the engine wiring harness bracket out of the way.
    5. Fig 2: View Of Generator Bracket & Bolts
    GM847280Courtesy of GENERAL MOTORS CORP.
  5. Remove the generator bracket bolts.
  6. Remove the generator bracket from the vehicle.
  7. Transfer any parts as needed.
About FixVault