Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying J 41805

Courtesy of GENERAL MOTORS CORP.

Using the J 41805 (1), install the rear bushing. See Special Tools .

Fig 2: View Of Rear Bushing

Courtesy of GENERAL MOTORS CORP.

Install the rear bushing to the predetermined measurement taken earlier.
Install the lower control arm. Refer to Lower Control Arm Replacement (2WD, Z85, ZQ8) .
Install the front drive axle, if equipped. Refer to Differential Carrier Assembly Replacement .