Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Crankshaft Position (CKP) Sensor

Courtesy of GENERAL MOTORS CORP.

Install the crankshaft position sensor.

CAUTION: Refer to Fastener Caution .

Install the crankshaft position sensor bolt and tighten to 10 N.m (89 lb in).

Fig 2: Locating CKP Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the CKP electrical connector (3).

Fig 3: View Of Right Exhaust Manifold Heat Shield

Courtesy of GENERAL MOTORS CORP.

Install the exhaust manifold heat shield and tighten to 10 N.m (89 lb in).
Lower the vehicle.