FixVault
Home › Hummer › 2008 › H3 Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 405 (Engine Controls And Fuel - 4.6L - Introduction) › Repair Instructions › Fuel System Cleaning › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the fuel system as follows:

  1. Install the fuel injectors and fuel rail. Refer to Fuel Injector and Fuel Rail Replacement .
  2. Install the fuel module assemblies. Refer to Primary Fuel Tank Module Replacement  and Secondary Fuel Tank Module Replacement .
  3. Install the fuel filter. Refer to Fuel Filter Replacement .
  4. Connect the fuel line to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service .
About FixVault