Installation Procedure
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the generator bracket.
- Install the generator bracket bolts.
- Tighten the generator bracket bolts (1, 2) to 50 N.m (37 lb ft).
- Tighten the generator bracket bolt (3) to 23 N.m (17 lb ft).
- Install the belt tensioner. Refer to Water Pump and Generator Belt Tensioner Replacement .
- Install the coolant inlet pipe lower bolt from the generator bracket.
- Install the generator. Refer to Generator Replacement (LLT) .
CAUTION:
Refer to Fastener Caution
.