FixVault
Home › Hummer › 2008 › H3 Base, Standard › Repair and Diagnosis › Transmission › Manual Transmission › Repair Instructions - On Vehicle › Vehicle Speed Sensor Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of VSS Electrical Connector
    GM1302108Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the vehicle speed sensor (VSS) electrical connector (2).
    3. Fig 2: View Of Vehicle Speed Sensor (VSS) With O-Ring Seal
    GM880951Courtesy of GENERAL MOTORS CORP.
  3. Remove the VSS with O-ring seal.
About FixVault