FixVault
Home › Hummer › 2009 › H2 4D Utility Pickup › Repair and Diagnosis › Engine Mechanical › Exhaust System › Repair Instructions › Floor Panel Heat Shield Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Exhaust Front Heat Shield
    GM707400Courtesy of GENERAL MOTORS CORP.
  1. Remove the exhaust front heat shield nuts.
  2. Remove the exhaust front heat shield from the studs.
    3. Fig 2: View Of Exhaust Heat Shields
    GM707411Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust heat shield nuts.
  4. Remove the exhaust heat shield(s) from the studs.
About FixVault