Installation Procedure

Fig 1: View Of MAF/IAT Sensor & Air Cleaner Assembly

Courtesy of GENERAL MOTORS CORP.

Install the air cleaner resonator outlet duct to the throttle body assembly and the MAF/IAT sensor assembly.
Connect the PCV tube to the outlet duct.
Tighten the clamps at the throttle body assembly and the MAF/IAT sensor assembly.
CAUTION: Refer to Fastener Caution .

Specification: Tighten the clamps to 5 N.m(44 lb in)
Install the intake manifold sight shield. Refer to UPPER INTAKE MANIFOLD SIGHT SHIELD REPLACEMENT .