FixVault
Home › Hummer › 2009 › H3 Alpha › Repair and Diagnosis › Engine Mechanical › Exhaust System › Repair Instructions › Exhaust Pipe Heat Shield Replacement › Removal Procedure

Removal Procedure

WARNING: Refer to Exhaust Service Warning .
WARNING: Refer to Protective Goggles and Glove Warning .
    Fig 1: Exhaust Pipe Heat Shield Replacement
    GM1902752Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the exhaust pipe heat shield nuts (2) and shield (1), if necessary.
    3. Fig 2: Exhaust Pipe heat Shield Nuts
    GM1902753Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust pipe heat shield nuts (2) and shield (1), if necessary.
About FixVault