FixVault
Home › Hummer › 2009 › H3 Alpha › Repair and Diagnosis › Engine Mechanical › Exhaust System › Repair Instructions › Exhaust System Insulator, Hanger, Bracket Replacement › Removal Procedure

Removal Procedure

WARNING: Refer to Exhaust Service Warning .
WARNING: Refer to Protective Goggles and Glove Warning .
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of Exhaust Pipe Hanger
    GM1313623Courtesy of GENERAL MOTORS CORP.
    NOTE: Service the exhaust hangers individually in order to retain the support of the exhaust system.
    NOTE: Do not use oil base lubricants.
  2. Apply a soapy solution to the following in order to ease the removal of the hanger (1):
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
  3. Pry the exhaust pipe hanger (1) free from the following:
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
About FixVault