FixVault
Home › Hummer › 2009 › H3 Alpha › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 5.3L - Introduction › Repair Instructions › Evaporative Emission System Hose/Pipe Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Tank Lines
    GM1564233Courtesy of GENERAL MOTORS CORP.
  1. Secure the EVAP pipe (2) to the clip on the fuel tank.
  2. Refer to Plastic Collar Quick Connect Fitting Service  in order to connect the EVAP pipe to the following:
    • The fuel tank module
    • The fuel tank vent valve
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
About FixVault