FixVault
Home › Hummer › 2009 › H3 Alpha › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 5.3L - Introduction › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating Fuel Tank Pressure Sensor
    GM1564234Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Gently pull and/or pry in an upward motion, in order to remove the fuel tank pressure sensor from the fuel tank module.
About FixVault