Front Fog Lamp Replacement (PLATINUM)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Fog Lamp Assembly & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front lower bumper filler. Refer to Front Bumper Filler Replacement (Z71) , Front Bumper Filler Replacement (All Utility, Avalanche, Cadillac EXT) . Disconnect the electrical connectors for the front park turn signal lamp and the front fog lamp sockets. The bulbs can be removed after the lamp housing has been removed from the front bumper fascia.
1	Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Front Fog Lamp Assembly TIP: Remove the lamp assembly from the front side of the lower bumper fascia.
3	Fog Lamp Bulb WARNING: Refer to Halogen Bulb Warning . TIP: Rotate the bulb socket counterclockwise in order to remove.
4	Park, Turn Signal Lamp Bulb Socket TIP: Rotate the bulb socket counterclockwise in order to remove.
5	Park, Turn Signal Lamp Bulb TIP: Pull the bulb straight from the socket.