FixVault
Home › Hummer › 2009 › H3 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.7L - Introduction › Repair Instructions › Secondary Air Injection Pump Outlet Hose Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Air Injection (AIR) Pump Inlet & Outlet Hoses
    GM1749357Courtesy of GENERAL MOTORS CORP.
  1. Install the AIR pump outlet hose to the vehicle.
  2. Connect the AIR pump outlet hose quick connect fitting (2) to the AIR pump. Refer to Plastic Collar Quick Connect Fitting Service .
    3. Fig 2: Locating Air Injection (AIR) Pump Outlet Hose
    GM1749355Courtesy of GENERAL MOTORS CORP.
  3. Connect the AIR pump outlet hose quick connect fitting to the AIR check valve. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  5. Close the hood.
About FixVault