FixVault
Home › Hummer › 2009 › H3 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.7L - DTC P0324 To DTC P0446 › DTC P0451-P0454 › Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the scan tool fuel tank pressure (FTP) sensor parameter. The reading should be between 1.3-1.7 volts with the fuel cap removed, and change with fuel tank pressure.
  2. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
About FixVault