FixVault
Home › Hummer › 2009 › H3 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.7L - DTC P0324 To DTC P0446 › DTC P0506 or P0507 › Circuit/System Verification

Circuit/System Verification

  1. If there are any other DTCs set, diagnose those first.
  2. Using a scan tool compare the desired engine idle speed to the actual engine idle speed.
    • Actual engine idle speed should be no greater than 100 RPM below desired.
    • Actual engine idle speed should be no greater than 200 RPM above desired.
  3. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
About FixVault