FixVault
Home › Hummer › 2009 › H3 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.7L - DTC P0324 To DTC P0446 › DTC P0641 or P0651 › Circuit/System Verification

Circuit/System Verification

  1. With the ignition ON and the engine OFF, observe the 5-volt Reference 1 and 2 parameters. The scan tool should display 4.8-5.2 volts for a normally operating system.
  2. Ignition ON, observe the DTC information with a scan tool. DTCs P0641 and P0651 should not set on this ignition cycle.
  3. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
About FixVault