FixVault
Home › Hummer › 2009 › H3 Base, Automatic › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Replacement (LLR) › Removal Procedure

Removal Procedure

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Remove the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement (LLR)  or Power Steering Pump Pulley Replacement (LH8) .
  3. Disconnect the wiring harness from the power steering fluid reservoir.
  4. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  5. Place drain pans under the vehicle as needed.
    6. Fig 1: View Of Power Steering Pressure Hoses
    GM1207233Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the power steering gear inlet and outlet hose from the power steering pump and power steering fluid reservoir assembly.
    7. Fig 2: View Of Power Steering Pump & Mounting Bolts
    GM1201379Courtesy of GENERAL MOTORS CORP.
  7. Remove the power steering pump bolts.
  8. Remove the power steering pump and power steering fluid reservoir assembly from the vehicle.
  9. Transfer any parts as needed.
About FixVault