FixVault
Home › Hummer › 2009 › H3 Base, Standard › Repair and Diagnosis › Electrical › Body Electrical › Wiring Systems And Power Management - Introduction › Repair Instructions › Ignition Lock Cylinder Control Solenoid Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Lock Cylinder Solenoid
    GM1663830Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition lock cylinder solenoid.
  2. Install the steering column shroud. Refer to Steering Column Shroud Replacement .
  3. Enable the SIR system. Refer to SIR Disabling and Enabling .
About FixVault