FixVault
Home › Hummer › 2009 › H3T Base, Automatic › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Front Lower Control Arm Bushing Replacement › Removal Procedure

Removal Procedure

  1. Remove the front drive axle, if equipped. Refer to Differential Carrier Assembly Replacement .
  2. Remove the lower control arm. Refer to Lower Control Arm Replacement .
    3. Fig 1: View Of Rear Bushing
    GM1241417Courtesy of GENERAL MOTORS CORP.
  3. Before removing the bushing, measure and record the distance from the bushing flange to the bracket. This will be the distance that the new bushing will be installed to.
    4. Fig 2: Identifying J 41805
    GM1241423Courtesy of GENERAL MOTORS CORP.
  4. Using the J 41805  (1), remove the rear bushing. See Special Tools .
About FixVault