FixVault
Home › Hummer › 2009 › H3T Base, Automatic › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Stabilizer Shaft Link Replacement › Installation Procedure

Installation Procedure

  1. Support the lower control arms at curb height.
    2. Fig 1: View Of Link Assembly
    GM1559081Courtesy of GENERAL MOTORS CORP.
  2. Install the link assemblies.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the nuts to the link assemblies.

    Tighten:  Tighten the nut to 80 N.m (59 lb ft).

  4. Lower the vehicle.
About FixVault