FixVault
Home › Hummer › 2010 › H3 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.7L - Repair Instructions › Repair Instructions › Accelerator Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Accelerator Pedal Position Sensor Electrical Connector
    GM1560064Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
    2. Fig 2: Accelerator Pedal Position Sensor
    GM1560065Courtesy of GENERAL MOTORS CORP.
  2. Remove the accelerator pedal/APP sensor nuts.
  3. Remove the accelerator pedal/APP sensor from the vehicle.
About FixVault