Component Testing
WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the cruise control release switch.
- Test for less than 1 ohm between terminals 1 and 2 at the switch.
- If not the specified value, replace the cruise control release switch.
- Depress the brake pedal. Test for infinite resistance between terminals 1 and 2 at the switch.
- If not the specified value, replace the cruise control release switch.