Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Tail Lamp Assembly

Courtesy of GENERAL MOTORS CORP.

Install the bulbs to the tail lamp, and/or side marker lamp sockets.
Install the tail lamp sockets to the tail lamp, rotating clockwise until the locking tab is fully seated.

Fig 2: View Of Tail Lamp Screws

Courtesy of GENERAL MOTORS CORP.

Press the tail lamp to the rear body panel until fully seated.

CAUTION: Refer to Fastener Caution .

Install the tail lamp screws (1) to the tail lamp.
Tighten: Tighten the tail lamp screws (1) to 3 N.m (26 lb in).
Close the tailgate.