FixVault
Home › Hummer › 2010 › H3 Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 39 (Hydraulic Brake System) › Repair Instructions › Brake Fluid Level Indicator Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fluid sensor in the master cylinder. Make sure that the sensor is fully seated.
  2. Install the electrical connector
About FixVault