FixVault
Home › Hummer › 2010 › H3T Base, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.7L - Repair Instructions › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Fuel Tank Pressure Sensor
    GM1564234Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Gently pull and/or pry in an upward motion, in order to remove the fuel tank pressure sensor from the fuel tank module.
About FixVault