Power Mirror Switch
Remove power mirror switch. Disconnect harness connector and check for continuity at switch terminals with switch in indicated positions. See POWER MIRROR SWITCH CONTINUITY TEST table. SeeFig 1 . Replace switch if it does not test as specified.
POWER MIRROR SWITCH CONTINUITY TEST
| Application | Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 3 & 4, 5 & 7 | |
| Down | 3 & 5, 4 & 7 | |
| Off | No Continuity | |
| Left | 2 & 7, 3 & 4 | |
| Right | 2 & 3, 4 & 7 | |
| Right Mirror | ||
| Up | 3 & 4, 6 & 7 | |
| Down | 3 & 6, 4 & 7 | |
| Off | No Continuity | |
| Left | 1 & 7, 3 & 4 | |
| Right | 1 & 3, 4 & 7 | |