Select Cable

WARNING: This page is about a different car, the 1989 Eagle Summit. However, it is still accessible from the selected car via links, so may be relevant.

Place transaxle side shift lever in Neutral. This will also place transaxle side select lever in Neutral. See Fig 1 .
Loosen selector cable adjuster nuts (inside of vehicle). With select lever in Neutral, adjust select cable end so eye fits easily over select lever pin. See Fig 2 . Tighten adjuster nuts.

Fig 1: Typical Transaxle Control Cables

Courtesy of CHRYSLER MOTORS.

Fig 2: Adjusting Select Cable

Courtesy of CHRYSLER MOTORS.