Power Mirror Switch
Remove power mirror switch. Disconnect harness connector and check for continuity in each switch position, between indicated switch terminals. See POWER MIRROR SWITCH CONTINUITY TEST table. SeeFig 1 . Replace switch if continuity is not as specified.
POWER MIRROR SWITCH LOCATION
| Application | Location |
|---|---|
| Scoupe | Driver-Side Instrument Panel, To Left Of Steering Column |
POWER MIRROR SWITCH CONTINUITY TEST
| Application | Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 3 & 4; 5 & 7 | |
| Down | 3 & 5; 4 & 7 | |
| Neutral | No Continuity | |
| Left | 2 & 7; 3 & 4 | |
| Right | 2 & 3; 4 & 7 | |
| Right Mirror | ||
| Up | 3 & 4; 6 & 7 | |
| Down | 3 & 6; 4 & 7 | |
| Neutral | No Continuity | |
| Left | 1 & 7; 3 & 4 | |
| Right | 1 & 3; 4 & 7 | |