Power Mirror Switch
Remove power mirror switch. Disconnect harness connector and check for continuity in each switch position, between indicated switch terminals. See POWER MIRROR SWITCH CONTINUITY TEST table. SeeFig 1 . Replace switch if continuity is not as specified.
POWER MIRROR SWITCH LOCATION
| Application | Location |
|---|---|
| Sonata | Driver's Door |
POWER MIRROR SWITCH CONTINUITY TEST
| Application | Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 1 & 8; 7 & 12 | |
| Down | 1 & 7; 8 & 12 | |
| Neutral | No Continuity | |
| Left | 1 & 8; 9 & 12 | |
| Right | 1 & 9; 8 & 12 | |
| Right Mirror | ||
| Up | 1 & 8; 10 & 12 | |
| Down | 1 & 10; 8 & 12 | |
| Neutral | No Continuity | |
| Left | 1 & 8; 11 & 12 | |
| Right | 1 & 11; 8 & 12 | |