FixVault
Home › Hyundai › 2001 › Tiburon Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle System Troubleshooting › Troubleshooting (A/T) › General › Using Hi-Scan

Using Hi-Scan

  1. Turn OFF the ignition switch.
  2. Connect the HI-SCAN to the data link connector.
  3. Turn ON ignition switch.
  4. Use the HI-SCAN to check the diagnostic trouble code.
  5. Repair the faulty part from the diagnosis chart.
  6. Erase the diagnostic trouble code.
  7. Disconnect the HI-SCAN.
About FixVault