FixVault
Home › Hyundai › 2001 › Tiburon Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 3 (Automatic Transaxle System Troubleshooting) › Troubleshooting (A/T) › General › Using Hi-Scan

Using Hi-Scan

WARNING: This page is about a different variant/trim than selected.
  1. Turn OFF the ignition switch.
  2. Connect the HI-SCAN to the data link connector.
  3. Turn ON ignition switch.
  4. Use the HI-SCAN to check the diagnostic trouble code.
  5. Repair the faulty part from the diagnosis chart.
  6. Erase the diagnostic trouble code.
  7. Disconnect the HI-SCAN.
About FixVault