FixVault
Home › Hyundai › 2003 › Accent GL, 4D Sedan, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle System › Automatic Transaxle System › Shift Lever › Reassembly

Shift Lever: Reassembly

  1. Apply a coating of grease to the sliding part of the bushing.

    Specified grease:  Chassis grease SAE J310, NLGI No.2

    Fig 1: Applying A Coating Of Grease To Sliding Part Of Bushing
    G00964323Courtesy of HYUNDAI MOTOR CO.
  2. Apply the specified grease at the places shown in the figure.

    Specified grease:  Multipurpose grease SAE J310, NLGI No.2

    Fig 2: Applying Specified Grease
    G00964324Courtesy of HYUNDAI MOTOR CO.
About FixVault