Strut Assembly: Installation
- When installing the front strut, be sure to clear the connecting surface and make the identification color mark face backward.
- Tighten the components below to the specified torque as follows.
- Tightening torque
- Front strut upper mounting nut:
- 45-60 Nm (450-600 kg.cm, 33.2-44.3 lb.ft)
- Front strut to knuckle:
- 130-150 Nm (1300-1500 kg.cm, 96-111 lb.ft)
- Install the brake hose and front wheel speed sensor wire on the front strut assembly.