Second Brake End Play Adjustment

Replace the pressure plate of the second brake with the special tool, and then install the brake disc and brake plate as shown in the figure. Install the return spring, second brake piston, and snap ring.

Fig 1: Identifying Second Brake Piston, Snap Ring & Return Spring

Courtesy of HYUNDAI MOTOR CO.

Standard value: 0.79-1.25 mm

Select a pressure plate whose thickness is within the following value. [A (moving amount) + thickness of the special tool - 1.25] to [A (moving amount) + thickness of the special tool - 0.79]. Refer to SNAP RING FOR ADJUSTMENT & SPACER (A/T)  .

Fig 2: Measuring Second Brake End Play

Courtesy of HYUNDAI MOTOR CO.