FixVault
Home › Hyundai › 2003 › XG350 Base › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Electronic Time & Alarm Control System › Removal And Installation › ETACS Control Module

ETACS Control Module

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lower crash pad panel.
    Fig 1: Removing Lower Crash Pad Panel
    G00720622Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the connectors and remove the ETACS CM.
    Fig 2: Removing ETACS Control Module
    G00720623Courtesy of HYUNDAI MOTOR CO.
About FixVault