2. Check The Power Source Circuit

1. Disconnect the connector from the ABS control module.
2. Turn the ignition switch ON, measure the voltage between terminal 4 of the ABS control module harness side connector (E37) and body ground.
   Fig 1: Locating Terminal 4 Of ABS Control Module Harness Side Connector

   Courtesy of HYUNDAI MOTOR CO.

• Specification: approximately B+ 

Is the voltage within specification? 

Yes: Go to the next step.

No: Check the harness or connector between the No. 11 fuse (10A) in the passenger compartment junction block and the ABS control module. Repair if necessary.