FixVault
Home › Hyundai › 2004 › Tiburon Base, Automatic › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Abs (Anti-Lock Brake System) › Description › Hi-Scan (Pro) Check

Hi-Scan (Pro) Check

  1. Turn the ignition switch OFF.
  2. Connect the Hi-scan (pro) to the 16P data link connector located underneath the lower crash pad panel.
    Fig 1: Identifying Data Link Connector Terminals
    G00889821Courtesy of HYUNDAI MOTOR CO.
  3. Turn the ignition switch ON.
  4. Check for diagnostic trouble codes using the Hi-scan (pro).
  5. After completion of the repair or correction of the problem, erase the stored fault codes using the clear key on the Hi-scan (pro).
  6. Disconnect the Hi-scan (pro) from the 16P data link connector.
About FixVault