FixVault
Home › Hyundai › 2004 › Tiburon Base, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel System (2.0L) › DTC Troubleshooting Procedures › DTC P1372: Segment Time Acquisition Incorrect › Inspection Procedures

Inspection Procedures

  1. CHECK DTC RELATING TO CKPS
    1. Connect a Hi-Scan (Pro) to the data link connector.
    2. Turn ignition switch to ON position and monitor DTCs relating to CKPS.

    Are DTCs relating to CKPS also set? 

    No: Go to next

    Yes: Do all repairs associated with those codes before proceeding with this procedure.

  2. CHECK INSTALLATION OF CKPS AND SENSOR WHEEL
    1. Turn ignition switch to OFF position and disconnect the CKPS connector.
    2. Check the sensor wheel for damaged teeth, cracks, improper installation and measure the clearance between the CKPS and the sensor wheel with a depth gauge.
    3. Check the CKPS for loose, bent, corroded, contaminated, deteriorated, or damaged connectors.
    • Refer to  SENSOR WHEEL  . 

      Are the CKPS and sensor wheel okay? 

    Yes: Proceed with ECM PROBLEM PROCEDURE  .

    No: Repair or replace it.

About FixVault